Skip to content
Quick couplings

QCA

Poppet type quick coupling, A series

ISO 7241-A compliant poppet-type quick coupling with ball locking. It is the most widely used connection size in the world for tractors, agricultural equipment and general hydraulics; manufactured in body sizes from 6.3 to 50.

QCA · BSPP female thread QCA – Poppet type quick coupling, A series
315barMax. working pressure
6,3–50Body size
9Connection type: BSPP female thread, NPT female thread, UNF female thread (SAE), BSPP male thread, Metric L series, Metric S series, Metric L series, bulkhead, Metric S series, bulkhead, UNF male thread (SAE)
254Product code

Features and benefits

Technical specifications

  • LockingLocking ball system
  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 250 bar
  • Body sizesISO 6.3–50
  • CompatibilityISO 7241-A
  • Thread optionsBSPP·NPT·UNF·Metric
  • SealNBR/FKM
  • Flow rateUp to 757 l/min
  • MaterialCarbon steel·Stainless steel·Brass
  • Connection typePush-type
  • Under residual pressureConnection: not permitted·Disconnection: not permitted
  • Valve typePoppet

Performance

Select the body size and see what it covers.

Working and burst pressure, rated flow rate, amount of oil lost per disconnection, and operating temperature.

Working pressure 6,3
315bar
4569 psi In this series 100 – 315 bar
Burst pressure 6,3
1260bar
18275 psi In this series 400 – 1260 bar
Flow rate 6,3
3l/dk
0.79 gpm In this series 3 – 757 l/dk
Body size Working pressure Burst pressure Flow rate
barpsi barpsi l/dkgpm
6,3 315 / 4569 1260 / 18275 3 / 0.79
10 315 / 4569 1260 / 18275 23 / 6.08
12,5 250 / 3626 1000 / 14504 45 / 11.89
19 250 / 3626 1000 / 14504 106 / 28.00
25 200 / 2901 800 / 11603 189 / 49.93
31,5 200 / 2901 800 / 11603 288 / 76.08
40 160 / 2321 640 / 9282 379 / 100.12
50 100 / 1450 400 / 5802 757 / 199.98

Technical data

Pressure drop by flow.

Pressure drop across the connection for each body size. Select a size; hover over the chart or enter your flow to read a value.

0.57.3 0.710.2 114.5 1.521.8 229 2.536.3 343.5 3.550.8 458 4.565.3 572.5 20.53 30.79 51.32 102.64 205.28 307.93 5013.2 10026.4 20052.8 30079.3 500132.1 1000264.2 2000528.3 3000792.5 50001320.9 ΔP (bar) Q (l/min) ΔP (PSI) Q (GPM) ISO 6,3 ISO 10 ISO 12,5 ISO 19 ISO 25 ISO 31,5 ISO 40 ISO 50
6,3Catalogue tableValues from the ISO body size table.
Rated flow
3.0l/min
0.79 GPM
Pressure drop at rated flow
0.20bar
2.8 PSI · read from the curve
Source
Catalogue table
l/min
  • 6,3 0.32 bar4.6 PSI
  • 10 < 0.10 bar< 1.5 PSI
  • 12,5 < 0.10 bar< 1.5 PSI
  • 19 < 0.10 bar< 1.5 PSI
  • 25 < 0.10 bar< 1.5 PSI
  • 31,5 < 0.10 bar< 1.5 PSI
  • 40 < 0.10 bar< 1.5 PSI
  • 50 < 0.10 bar< 1.5 PSI

Read from each size’s curve; sizes outside their curve show “out of range”.

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Do not connect or disconnect under residual pressure.
  2. Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
  3. For a full connection, make sure the male and female halves are on the same axis.

Warnings

Read before installation and use

  • Do not connect or disconnect under dynamic pressure.
  • Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

FAQ

The questions users ask most.

Can it be connected under residual pressure?

No. Connecting and disconnecting under residual pressure is not permitted; first relieve the pressure in the line.

Is it compatible with other brands' couplings?

Manufactured to ISO 7241-A dimensions; mates with halves of the same standard and the same body size.

Can QCA and QCF be connected to each other?

No. QCA conforms to ISO 7241-A and QCF to ISO 16028; halves of different standards cannot be connected to each other.

Which seal should I choose?

NBR is sufficient in standard mineral oil.

Can't find your question?Our technical team answers every question about the series.Contact technical support

Applications

Where is QCA used?

All application areas 8

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Can't find the size or connection you need in the list?

Send us the code or a technical drawing; we will get back to you with a suitable product and price.

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept