Skip to content
Ball valves

KV3T

3-way T-type ball valve

3-way T-type ball valve that directs flow from the inlet port to one or both of the outlets.

KV3T · BSPP / NPT / UNF KV3T – 3-way T-type ball valve
10–25Body size
1Connection type: BSPP / NPT / UNF
21Product code

Features and benefits

Technical specifications

  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 500 bar
  • Body sizesDN10-25
  • MaterialHigh-strength·Carbon steel·Stainless steel
  • Thread optionsBSP/NPT/SAE/Metric
  • SealNBR/FKM/PTFE/EPDM

How it works

Where does the oil flow in each lever position?

Position 1

P → A

B closed.

Position 2

P → B

A closed.

Position 3

P → A and B

Oil goes to both outlets at once.

Intermediate position

With the lever between two positions, flow is not shut off completely; a small amount of oil may pass to both outlets.

Port markings

Ports P, A and B must be marked on the body; the installer must be able to read the direction from the body.

Selection

Each letter of the code describes an option.

Your code contains the series, size and thread.

KV3T-10-G14
Thread G = BSPP NPT SAE = UNF
Body size 10 12 (12,5) 20 25
Series 3-way T-port

Technical data

Each body size has its own pressure limit.

Valves with larger bodies withstand lower pressure. When the seal changes, the limit changes too.

Scroll the table sideways to see all columns
Body sizeThread examplesMaximum working pressureTest pressureWeight
DN10G 1/4 · G 3/8 · 7/16-20 UNF500 barPending0.45 – 0.48 kg
DN12.5G 1/2 · 3/4-16 UNF500 barPending0.66 kg
DN20G 3/4 · 1 1/16-12 UN400 barPending1.31 kg
DN25G 1 – G 1 1/2 · 1 5/16 – 1 7/8 UN400 bar1 1/4″ and 1 1/2″ class connections 350 barPending1.87 – 2.90 kg
Scroll the table sideways to see all columns
SealMaximum pressureTemperatureSuitable fluid
NBR (standard)Pending−20 / +100 °CMineral-based hydraulic oil
FKMPendingPendingHigh temperature, fuel, synthetic oil
PTFEPendingPendingAlmost any hydraulic fluid
EPDMPendingPendingWater-glycol, phosphate ester fluid (not used with mineral oil)

Technical data

How much force is needed to turn the handle?

This information is needed to select the lever length for manual operation, or the actuator size for actuated operation.

Scroll the table sideways to see all columns
Body size0 bar100 bar250 barMaximum pressure
DN10PendingPendingPendingPending
DN12.5PendingPendingPendingPending
DN20PendingPendingPendingPending
DN25PendingPendingPendingPending

Installation and use

Lock, limit switch, actuation.

Scroll the table sideways to see all columns
OptionWhat is it for?Oleocon
Locking plateLocks the valve in the selected position✔ Yes
Lock + limit switchSignals the valve position electricallyPending
Pneumatic / electric actuatorRemote position changePending
Supplied without handleFor machine manufacturers who will fit their own handle or actuatorPending
Stainless steel body / ballCorrosive environmentListed in the catalog

Warnings

What not to do with a ball valve.

Caution
  1. Not used for flow adjustment

    A ball valve works fully open or fully closed. Use FUV / FCV for flow adjustment.

  2. Do not leave in an intermediate position

    Always move the lever to a full position. In an intermediate position the seat is damaged, and on a 3-way valve flow is not completely shut off.

  3. The inlet is the highest-pressure side

    Port P (inlet) must always be connected to the highest-pressure line. If connected the wrong way round, the seal is overstressed.

  4. Turn slowly under pressure

    A sudden change of position creates a pressure shock in the line.

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Make sure the flow rate is within normal values.
  2. Do not expose to abnormal operating conditions (for example oscillation, pressure shocks, water hammer, cavitation, solid and abrasive particles).

Warnings

Read before installation and use

  • Do not touch the valves when the operating temperature is below -20 °C or above +50 °C.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure all connection surfaces are clean so that dirt and dust do not build up in the circuit.
  • Make sure the mounting parts are on the same axis and fully connected.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

Quality

Every valve is tested before shipment.

  • Every valve undergoes a pressure test (test pressure and duration)
  • Material certificate (EN 10204 3.1) on request
  • Marine / maritime approvals (DNV, ABS, BV)
  • ISO 9001 quality management
  • Place of manufacture: Konya, Türkiye

FAQ

The questions users ask most.

What is the difference between KV3L and KV3T?

KV3L directs the flow from the inlet to one of the two outlets. In addition, KV3T can also send oil to both outlets at once.

What is the maximum working pressure in bar?

Varies by body size: 500 bar for DN10 and DN12.5, 400 bar for DN20 and DN25, 350 bar for the 31.5 and 40 types of DN25. The stainless steel version is in the 250–400 bar range.

Can it be used for flow rate adjustment?

No. The ball valve works at the full positions between the stops; in an intermediate position the ball seat wears and the seal is compromised. Use FUV or FCV series flow control valves for flow rate adjustment.

Which seal should I choose?

The standard seal is NBR and is used for mineral-based hydraulic oil. FKM and EPDM are optional; FKM is standard on stainless steel valves. Confirm suitability with technical support.

Is there a stainless steel option?

Yes. The AISI 316L stainless steel version is used in the −20 °C / +200 °C range at 250–400 bar.

Can the valve be locked in the desired position?

Yes. By changing the position of the locking plate, the valve can be locked in the desired position.

What thread types are available?

Available in BSPP, NPT and UNF (SAE) types.

Can't find your question?Our technical team answers every question about the series.Contact technical support

Applications

Where is KV3T used?

All application areas 8

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Can't find the size or connection you need in the list?

Send us the code or a technical drawing; we will get back to you with a suitable product and price.

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept