Skip to content
Auxiliary Valves

SJS

Straight swivel joint

A straight swivel joint fitted between the moving hose end and a fixed part to prevent hose twisting. For slow-rotation, high-pressure applications.

SJS · Straight swivel joint SJS – Straight swivel joint
6,3–25Body size
1Connection type: Straight swivel joint
5Product code

Features and benefits

Technical specifications

  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 350 bar
  • Dimensions1/4″ – 1″
  • MaterialCarbon steel·Stainless steel·Brass
  • Thread optionsBSP
  • SealNBR/FKM

Selection

How is the product code read?

SJS-6-G14M
Thread G = BSPP
Body size 6 (6,3) 10 12 (12,5) 19 25
Series Straight swivel joint

How it works

How does the joint work?

Fitted between the moving hose end and the fixed part. The joint rotates on its own axis to absorb twisting and extends hose life.

Straight swivel joint

Axial connection, for rotating lines.

For slow rotation

Not suitable for fast or continuous rotation; intended for slow-rotation and high-pressure applications.

Where is it used?

Attachment connections, buckets and booms, reel (drum) hoses, hand tools.

Selection

SJS or SJE?

Scroll the table sideways to see all columns
SJS · straightSJE · elbow
ShapeStraight (axial)90° elbow
When?If the hose continues straightIf the hose needs to turn 90° in a tight space
Dimensions1/4″ – 1″ BSP1/4″ – 1″ BSP
Example codeSJS-12-G12MSJE-12-G12M
Scroll the table sideways to see all columns
Body sizeThread (C / D)Length EWeight
6.31/4″73.5 mm0.27 kg
103/8″81 mm0.35 kg
12.51/2″93 mm0.53 kg
193/4″108 mm1.06 kg
251″123 mm1.35 kg

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Do not expose to abnormal operating conditions (for example oscillation, pressure shocks, water hammer, cavitation, solid and abrasive particles).

Warnings

Read before installation and use

  • Do not touch the product when the operating temperature is below -20 °C or above +50 °C.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure all connection surfaces are clean so that dirt and dust do not build up in the circuit.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

Installation and use

A wrongly installed swivel joint does not protect the hose.

Caution
  1. Fixed body, end to the hose

    The body side connects to the fixed part, and the rotating end connects to the hose.

  2. Do not use it to bear loads

    A swivel joint is not a bearing; support the weight of the hose with a clamp or support.

  3. Not for continuous rotation

    It is meant for slow, intermittent rotation; a continuously rotating reel requires a rotary union.

  4. Rotate after installation

    After the connection is tightened, the end must rotate freely by hand; if it binds, it was tightened on the wrong hex.

Installation and use

Port names and correct placement.

  1. 01

    C thread: body side

    Connected to the fixed part (e.g. machine port).

  2. 02

    D female: rotating end

    Connects to the hose; the hose rotates together with this end.

  3. 03

    Support the hose

    The hose is secured with a clamp before and after the joint; no side load acts on the joint.

  4. 04

    Check free rotation

    After assembly, the end should turn freely by hand.

Technical data

How fast can I rotate it?

A user's first question about a swivel joint is rotation speed.

Scroll the table sideways to see all columns
Value
Working pressureUp to 350 bar
Maximum rotation speed… rpm
Rotation under pressure…
Material optionsCarbon steel · Stainless steel · Brass

FAQ

The questions users ask most.

Can it be used on a continuously rotating reel?

No. SJS is for slow and intermittent rotation; continuous rotation requires a rotary union.

Is stainless steel or brass available?

Yes, carbon steel, stainless steel and brass options are available.

Which side is fitted to the fixed part?

The body side connects to the fixed part, and the rotating end connects to the hose.

Which seal should I choose?

NBR is sufficient in standard mineral oil.

Can't find your question?Our technical team answers every question about the series.Contact technical support

Applications

Where is SJS used?

All application areas 8

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Can't find the size or connection you need in the list?

Send us the code or a technical drawing; we will get back to you with a suitable product and price.

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept