Skip to content
Quick couplings

QCF

Flat-face quick-release couplings

Two flush faces that close before they separate: no oil escapes on disconnection and no dirt gets in. Built to ISO 16028 in body sizes 6.3 to 25, with BSPP, NPT, UNF and metric threads, for earthmoving attachments, agricultural machinery and industrial hydraulics.

QCF · BSPP female thread QCF – Flat-face quick-release couplings
315barMax. working pressure
6,3–25Body size
9Connection type: BSPP female thread, NPT female thread, UNF female thread (SAE), BSPP male thread, Metric L series, Metric S series, Metric L series, bulkhead, Metric S series, bulkhead, UNF male thread (SAE)
152Product code

Features and benefits

Technical specifications

  • CompatibilityISO 16028 (ISO 6.3 → ISO 25)
  • Valve typeFlat face
  • Connection systemPush-type (push-to-connect)
  • LockingRadial locking balls + safety lock
  • Connection under residual pressureNot permitted (connecting and disconnecting)
  • Material / coatingCarbon steel, Zn-Fe (Cr III)·also AISI 316L stainless steel and brass
  • Standard sealNBR·optional FKM, FFKM, EPDM
  • Thread optionsBSPP, NPT, UNF (SAE), metric L and S, bulkhead
  • Body sizes6.3·10·12.5·19·25
  • Working pressureUp to 315 bar·350–500 bar version available
  • Rated flow rateUp to 189 l/min at 1 bar pressure drop
  • Leakage per disconnection0.02–0.25 ml
  • Operating temperature−20 °C/+100 °C·up to +200 °C in stainless steel and brass

Performance

Select the body size and see what it covers.

Working and burst pressure, rated flow rate at 1 bar pressure drop, amount of oil lost per disconnection, and operating temperature.

Working pressure 6,3
315bar
4569 psi In this series 200 – 315 bar
Burst pressure 6,3
1260bar
18275 psi In this series 800 – 1260 bar
Flow rate 6,3
12l/dk
3.17 gpm In this series 12 – 189 l/dk
Body size Working pressure Burst pressure Flow rate
barpsi barpsi l/dkgpm
6,3 315 / 4569 1260 / 18275 12 / 3.17
10 250 / 3626 1000 / 14504 23 / 6.08
12,5 250 / 3626 1000 / 14504 45 / 11.89
19 250 / 3626 1000 / 14504 100 / 26.42
25 200 / 2901 800 / 11603 189 / 49.93

Technical data

Pressure drop by flow.

Pressure drop across the coupling for each body size. Select a body size; hover over the chart to read a value or enter your flow rate.

0.57.3 0.710.2 114.5 1.521.8 229 2.536.3 343.5 3.550.8 458 4.565.3 572.5 51.32 102.64 205.28 307.93 5013.2 10026.4 20052.8 30079.3 500132.1 ΔP (bar) Q (l/min) ΔP (PSI) Q (GPM) ISO 6,3 ISO 10 ISO 12,5 ISO 19 ISO 25
6,3EstimatedNot tested yet; curve estimated from the catalogue rated point (12 l/min · 1 bar).
Rated flow
12l/min
3.2 GPM
Pressure drop at rated flow
1.0bar
15 PSI · catalogue rated point
Source
Estimated
l/min
  • 6,3 1.8 bar26 PSI
  • 10 < 0.50 bar< 7.3 PSI
  • 12,5 < 0.50 bar< 7.3 PSI
  • 19 < 0.50 bar< 7.3 PSI
  • 25 < 0.50 bar< 7.3 PSI

Read from each size’s curve; sizes outside their curve show “out of range”.

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
  2. For a full connection, make sure the male and female halves are on the same axis.

Warnings

Read before installation and use

  • Do not connect or disconnect under dynamic pressure.
  • Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

FAQ

The questions users ask most.

Can it be connected under residual pressure?

No. Connecting and disconnecting under residual pressure is not permitted; first relieve the pressure in the line.

Is it compatible with other brands' couplings?

Manufactured to ISO 16028 dimensions; it mates with halves of the same standard and the same body size.

Does it leak oil when disconnected?

The flat face design leaks 0.02–0.25 ml per disconnection; the surface is easy to clean and less dirt enters the circuit.

Which seal should I choose?

The standard is NBR.

Can't find your question?Our technical team answers every question about the series.Contact technical support

Applications

Where is the QCF used?

All application areas 8

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Can't find the size or connection you need in the list?

Send us the code or a technical drawing; we will get back to you with a suitable product and price.

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept