Skip to content
QCF · Quick couplings

QCF-6B-SAE4

UNF female thread (SAE)ISO 11926-1

Two flush faces that close before they separate: no oil escapes on disconnection and no dirt gets in. Built to ISO 16028 in body sizes 6.3 to 25, with BSPP, NPT, UNF and metric threads, for earthmoving attachments, agricultural machinery and industrial hydraulics.

QCF-6B-SAE4 – UNF female thread (SAE)
QCF-6B-SAE4 · UNF female thread (SAE)
Dimensions

QCF-6B-SAE4 and other products in body size 6,3

Letters refer to the dimensions on the technical drawing. Click a code to open that product.

Performance

How much can QCF-6B-SAE4 take?

Operating conditions and sealing.

315bar
Working pressure · series maximum 315 bar
  • Working pressure315 bar4569 psi
  • Burst pressure1260 bar18275 psi
  • Flow rate12 l/dk3.17 gpm

Technical data

Pressure drop of this product.

The highlighted curve is this product’s body size; other sizes are shown in thin grey for comparison; click a size to switch. Enter your flow or hover over the chart.

0.57.3 0.710.2 114.5 1.521.8 229 2.536.3 343.5 3.550.8 458 4.565.3 572.5 51.32 102.64 205.28 307.93 5013.2 10026.4 20052.8 30079.3 500132.1 ΔP (bar) Q (l/min) ΔP (PSI) Q (GPM) ISO 6,3 ISO 10 ISO 12,5 ISO 19 ISO 25
6,3EstimatedNot tested yet; curve estimated from the catalogue rated point (12 l/min · 1 bar).
Rated flow
12l/min
3.2 GPM
Pressure drop at rated flow
1.0bar
15 PSI · catalogue rated point
Source
Estimated
l/min
≈ 1.8bar26 PSI · at 16 l/min (4.2 GPM)

Results are read from the curve; no estimate is made outside the curve.

Features and benefits

Technical specifications

  • CompatibilityISO 16028 (ISO 6.3 → ISO 25)
  • Valve typeFlat face
  • Connection systemPush-type (push-to-connect)
  • LockingRadial locking balls + safety lock
  • Connection under residual pressureNot permitted (connecting and disconnecting)
  • Material / coatingCarbon steel, Zn-Fe (Cr III)·also AISI 316L stainless steel and brass
  • Standard sealNBR·optional FKM, FFKM, EPDM
  • Thread optionsBSPP, NPT, UNF (SAE), metric L and S, bulkhead
  • Body sizes6.3·10·12.5·19·25
  • Working pressureUp to 315 bar·350–500 bar version available
  • Rated flow rateUp to 189 l/min at 1 bar pressure drop
  • Leakage per disconnection0.02–0.25 ml
  • Operating temperature−20 °C/+100 °C·up to +200 °C in stainless steel and brass

Applications

Where is the QCF used?

All application areas 8

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
  2. For a full connection, make sure the male and female halves are on the same axis.

Warnings

Read before installation and use

  • Do not connect or disconnect under dynamic pressure.
  • Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

Other QCF products with the same body size

Same mounting dimensions, only the connection thread changes · 21 connection options

6,3body sizesame body, different connection thread

View all

What does QCF-6B-SAE4 mean?

QCF
Series Flat face
6
Body size 6,3
B
Half Male
SAE4
Thread 7/16-20 UNF UNF

Other sizes of this type

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept