Skip to content
Quick couplings

EST

Screw-to-connect quick coupling with wing nut

A screw-to-connect poppet-type coupling that is tightened quickly by hand without a wrench thanks to its wing nut. For high-flow lines that are connected and disconnected often.

EST · Screw-to-connect quick coupling with wing nut EST – Screw-to-connect quick coupling with wing nut
350barMax. working pressure
19–25Body size
1Connection type: Screw-to-connect quick coupling with wing nut
4Product code

Features and benefits

Technical specifications

  • LockingScrew-to-connect
  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 350 bar
  • Dimensions3/4″ – 1″
  • Flow rateUp to 189 l/min
  • CompatibilityMarket standard
  • Thread optionsBSP
  • SealNBR/FKM
  • MaterialCarbon steel·Stainless steel
  • Connection typeScrew-to-connect
  • Under residual pressureConnection: from both sides·Disconnection: permitted
  • Valve typePoppet

Performance

Select the body size and see what it covers.

Working and burst pressure, rated flow rate, amount of oil lost per disconnection, and operating temperature.

Working pressure 19
350bar
5076 psi In this series 300 – 350 bar
Burst pressure 19
1325bar
19218 psi In this series 1325 bar
Flow rate 19
106l/dk
28.00 gpm In this series 106 – 189 l/dk
Body size Working pressure Burst pressure Flow rate
barpsi barpsi l/dkgpm
19 350 / 5076 1325 / 19218 106 / 28.00
25 300 / 4351 1325 / 19218 189 / 49.93

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
  2. For a full connection, make sure the male and female halves are on the same axis.

Warnings

Read before installation and use

  • Do not connect or disconnect under dynamic pressure.
  • Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

FAQ

The questions users ask most.

Can it be connected under residual pressure?

Yes. It can be connected and disconnected under residual pressure on both sides. However, do not connect or disconnect while there is flow in the line (under dynamic pressure).

Is it compatible with other brands' couplings?

Manufactured to market-standard dimensions.

Is a wrench needed to fit it?

No. Thanks to the wing nut, it is tightened by hand without a wrench; suitable for high-flow lines that are connected and disconnected often.

Which seal should I choose?

NBR is sufficient in standard mineral oil.

Can't find your question?Our technical team answers every question about the series.Contact technical support

Applications

Where is EST used?

All application areas 8

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Can't find the size or connection you need in the list?

Send us the code or a technical drawing; we will get back to you with a suitable product and price.

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept