Skip to content
Auxiliary Valves

FUV

One-way (check) flow control valve

Flow control valve that adjusts the flow rate in one direction and allows free flow in the opposite direction. The knob with a locking screw prevents the setting from drifting due to vibration.

FUV · One-way (check) flow control valve FUV – One-way (check) flow control valve
350barMax. working pressure
6,3–12,5Body size
1Connection type: One-way (check) flow control valve
9Product code

Features and benefits

Technical specifications

  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 350 bar
  • Dimensions1/4" – 1/2"
  • MaterialCarbon steel
  • Thread optionsBSP/NPT/SAE
  • SealNBR

Technical data

How much flow passes at each number of knob turns?

Users can see in advance which speed they get at how many turns.

Scroll the table sideways to see all columns
Knob turns (from fully closed)6.3 · 1/4″10 · 3/8″12.5 · 1/2″
1 turnPendingPendingPending
2 turnsPendingPendingPending
3 turnsPendingPendingPending
4 turnsPendingPendingPending
Fully open20 l/min30 l/min50 l/min
Number of turns from fully closed to fully openPendingPendingPending

Technical data

Flow–pressure drop curve with the restrictor open and closed.

Scroll the table sideways to see all columns
LengthMaximum flow rateMaximum pressureCheck valve opening pressurePressure drop in free-flow direction (at rated flow rate)Pressure drop with restrictor fully open
6.3 · 1/4″20 l/minPendingPendingPendingPending
10 · 3/8″30 l/minPendingPendingPendingPending
12.5 · 1/2″50 l/minPendingPendingPendingPending

Technical data

Does it throttle equally in both directions?

No. FUV has a check valve: it restricts only in the controlled direction; in the opposite direction the oil passes freely through the check valve.

Scroll the table sideways to see all columns
DirectionWhat happens?Pressure drop fully openFully closed
Controlled direction (cylinder to valve)Throttled with the knob to set the speedPendingPending
Free direction (valve to cylinder)Check valve opens, no throttlingPendingFree flow

Installation and use

Flow depends on pressure and oil viscosity.

FUV is not pressure-compensated: at the same setting, speed also changes when load or oil temperature changes.

Scroll the table sideways to see all columns
ConditionOleocon
Pressure compensationNot available in this size
ViscosityPending
Cleanliness classPending
Oil temperature (NBR)−20 … +100 °C
Leakage when closedPending

Installation and use

Is the setting visible from outside?

Scroll the table sideways to see all columns
FeatureWhat is it for?Oleocon FUV
Locking screwLocks the setting; does not drift with vibration✔ Yes
Setting indicator (color band / line)The setting can be read from outside in turns; the same setting can be passed on exactly to another machinePending
Tamper-proof knobThe operator cannot change the setting; only service canPending
Panel mountingMounts on the valve control panel; the knob stays outsidePending

Installation and use

Why does the speed change after adjustment?

FUV is not pressure-compensated: the setting behaves like a fixed orifice. When load or oil temperature changes, the flow rate passing through, and therefore cylinder speed, changes too.

Scroll the table sideways to see all columns
ConditionOleocon FUV
Maximum pressure350 bar
Maximum flow rate50 l/min
Temperature−20 … +100 °C
BodyCarbon steel
Port optionsBSP · NPT · SAE
Pressure compensationNot available in this size

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Do not expose to abnormal operating conditions (for example oscillation, pressure shocks, water hammer, cavitation, solid and abrasive particles).

Warnings

Read before installation and use

  • Do not touch the valve when the operating temperature is below -20 °C or above +50 °C.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure all connection surfaces are clean so that dirt and dust do not build up in the circuit.
  • Make sure the mounting parts are on the same axis and fully connected.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

Installation and use

Which way do I turn it to increase speed?

  1. 01

    Connect it in the right direction

    The controlled direction is from the cylinder to the valve; in the opposite direction the oil passes freely through the check valve.

  2. 02

    Adjustment direction

    Turning the adjusting screw one way increases the flow rate; turning it the other way decreases it.

  3. 03

    Tighten the lock nut

    So the setting does not drift under vibration.

  4. 04

    In a circuit with a lock valve

    The flow control valve is fitted between the cylinder and the TLV lock valve.

Applications

Where is FUV used?

All application areas 8

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Can't find the size or connection you need in the list?

Send us the code or a technical drawing; we will get back to you with a suitable product and price.

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept