Poppet type
6,3–50315bar
ISO 7241-A / B
OHP
Hydraulic hand pumps
Cast iron body hydraulic hand pumps for single and double acting cylinders. 25 cc and 45 cc displacement, two handle options.
Features and benefits
Technical specifications
- Operating temperature−20 °C/+100 °C
- Working pressureUp to 310 bar
- Dimensions25–45 cc·25 cc
- Thread optionsBSP
- SealNBR
- MaterialCast
How it works
Where does the oil go on each lever movement?
To a single-acting cylinder (1W)
Single pressure line (P); the cylinder returns by load or spring.
For double-acting cylinders (2W)
Ports A and B; with the directional lever, the cylinder is driven by the pump in both directions.
Single-acting pump (1A)
The pump delivers on only one stroke of the lever; on the return stroke it draws in oil.
Double-acting pump (2A)
The pump delivers on both strokes of the lever; it sends more oil in the same time.
Displacement
25 cc and 45 cc: the amount of oil delivered in one full stroke of the lever.
Selection
How is the product code read?
Technical data
Pressure, displacement and lever torque of each type.
| Code | Type | Displacement | Maximum pressure | Lever torque | Lever force at maximum pressure |
|---|---|---|---|---|---|
| OHP-25-2A-1W | Double-acting, one-way | 25 cc | 310 bar | Pending | Pending |
| OHP-45-2A-1W | Double-acting, one-way | 45 cc | 150 bar | Pending | Pending |
| OHP-25-1A-1W | Single acting, one direction | 25 cc | 310 bar | Pending | Pending |
| OHP-25-2A-2W | Double acting, two directions | 25 cc | 310 bar | Pending | Pending |
| OHP-45-2A-2W | Double acting, two directions | 45 cc | 150 bar | Pending | Pending |
Installation and use
With which oil, at what temperature?
| Condition | Oleocon |
|---|---|
| Oil class | Pending |
| Viscosity | Pending |
| Cleanliness class | Pending |
| Oil temperature | −20 … +100 °C |
| Biodegradable oil (HEES, HEPG) | Pending |
| Mounting position | Pending |
Installation and use
Suction line and tank layout.
-
01
Keep the suction line short
A long suction line makes it harder for the pump to draw oil.
-
02
Install the tank at or above the level of the suction port
The suction line does not drain while the pump is idle.
-
03
Relieve the pressure before disassembly
Disassembly in a pressurized system causes the cylinder to move suddenly.
-
04
Check at least once a year
If there are external leaks at the connections, stop the system and repair them.
Instructions and warnings
Before use.
Correct use
For long life and reliable sealing
- Do not expose to abnormal operating conditions (for example oscillation, pressure shocks, water hammer, cavitation, solid and abrasive particles).
Warnings
Read before installation and use
- !Do not touch the product when the operating temperature is below -20 °C or above +50 °C.
- !Make sure the system pressure is below the maximum working pressure.
- !Make sure all connection surfaces are clean so that dirt and dust do not build up in the circuit.
- !Make sure the mounting parts are on the same axis and fully connected.
- !Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
- !For any other questions, contact the Oleocon technical support team.
Warnings
What not to do with a hand pump.
Do not extend the handle
Fitting a pipe on the handle to extend it increases torque; the pin, handle and body are damaged.
Do not exceed the maximum pressure
The 25 cc pump is for 310 bar, the 45 cc pump for 150 bar. Use a pressure relief valve in the circuit.
Do not leave the tank empty
If the oil level drops, the pump draws in air and does not deliver; keep the suction side sealed.
Do not disassemble under pressure
Before removing a hose or fitting, open the release valve to relieve the pressure.
Applications
Where is OHP used?
Downloads
Catalogs, Technical Data and CAD.
You may also like
Related series
Can't find the size or connection you need in the list?
Send us the code or a technical drawing; we will get back to you with a suitable product and price.



























