Skip to content
Hydraulic hand pumps

OHP

Hydraulic hand pumps

Cast iron body hydraulic hand pumps for single and double acting cylinders. 25 cc and 45 cc displacement, two handle options.

OHP · Double-acting, one-way OHP – Hydraulic hand pumps
310barMax. working pressure
3Connection type: Double-acting, one-way, Single acting, one direction, Double acting, two directions
5Product code

Features and benefits

Technical specifications

  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 310 bar
  • Dimensions25–45 cc·25 cc
  • Thread optionsBSP
  • SealNBR
  • MaterialCast

How it works

Where does the oil go on each lever movement?

To a single-acting cylinder (1W)

Single pressure line (P); the cylinder returns by load or spring.

For double-acting cylinders (2W)

Ports A and B; with the directional lever, the cylinder is driven by the pump in both directions.

Single-acting pump (1A)

The pump delivers on only one stroke of the lever; on the return stroke it draws in oil.

Double-acting pump (2A)

The pump delivers on both strokes of the lever; it sends more oil in the same time.

Displacement

25 cc and 45 cc: the amount of oil delivered in one full stroke of the lever.

Selection

How is the product code read?

OHP–25–2A–1W
Suitable cylinder 1W 2W Suitable cylinder: single acting / double acting; port G3/8 on 1W, G1/4 on 2W
Pump 1A 2A Pump: delivers on one stroke / on both strokes of the lever
Displacement 25 45 Displacement (cc): 25 cc 310 bar, 45 cc 150 bar
Series Hydraulic hand pump

Technical data

Pressure, displacement and lever torque of each type.

Scroll the table sideways to see all columns
CodeTypeDisplacementMaximum pressureLever torqueLever force at maximum pressure
OHP-25-2A-1WDouble-acting, one-way25 cc310 barPendingPending
OHP-45-2A-1WDouble-acting, one-way45 cc150 barPendingPending
OHP-25-1A-1WSingle acting, one direction25 cc310 barPendingPending
OHP-25-2A-2WDouble acting, two directions25 cc310 barPendingPending
OHP-45-2A-2WDouble acting, two directions45 cc150 barPendingPending

Installation and use

With which oil, at what temperature?

Scroll the table sideways to see all columns
ConditionOleocon
Oil classPending
ViscosityPending
Cleanliness classPending
Oil temperature−20 … +100 °C
Biodegradable oil (HEES, HEPG)Pending
Mounting positionPending

Installation and use

Suction line and tank layout.

  1. 01

    Keep the suction line short

    A long suction line makes it harder for the pump to draw oil.

  2. 02

    Install the tank at or above the level of the suction port

    The suction line does not drain while the pump is idle.

  3. 03

    Relieve the pressure before disassembly

    Disassembly in a pressurized system causes the cylinder to move suddenly.

  4. 04

    Check at least once a year

    If there are external leaks at the connections, stop the system and repair them.

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Do not expose to abnormal operating conditions (for example oscillation, pressure shocks, water hammer, cavitation, solid and abrasive particles).

Warnings

Read before installation and use

  • Do not touch the product when the operating temperature is below -20 °C or above +50 °C.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure all connection surfaces are clean so that dirt and dust do not build up in the circuit.
  • Make sure the mounting parts are on the same axis and fully connected.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

Warnings

What not to do with a hand pump.

CautionThese items are what most determine the pump's service life and safety.
  1. Do not extend the handle

    Fitting a pipe on the handle to extend it increases torque; the pin, handle and body are damaged.

  2. Do not exceed the maximum pressure

    The 25 cc pump is for 310 bar, the 45 cc pump for 150 bar. Use a pressure relief valve in the circuit.

  3. Do not leave the tank empty

    If the oil level drops, the pump draws in air and does not deliver; keep the suction side sealed.

  4. Do not disassemble under pressure

    Before removing a hose or fitting, open the release valve to relieve the pressure.

Applications

Where is OHP used?

All application areas 8

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Can't find the size or connection you need in the list?

Send us the code or a technical drawing; we will get back to you with a suitable product and price.

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept