Poppet type
6,3–50315bar
ISO 7241-A / B
NPT female thread
Two flush faces that close before they separate: no oil escapes on disconnection and no dirt gets in. Built to ISO 16028 in body sizes 6.3 to 25, with BSPP, NPT, UNF and metric threads, for earthmoving attachments, agricultural machinery and industrial hydraulics.
QCF-25B-NPT1 and other products in body size 25
Letters refer to the dimensions on the technical drawing. Click a code to open that product.
How much can QCF-25B-NPT1 take?
Operating conditions and sealing.
- Working pressure200 bar2901 psi
- Burst pressure800 bar11603 psi
- Flow rate189 l/dk49.93 gpm
Technical data
Pressure drop of this product.
The highlighted curve is this product’s body size; other sizes are shown in thin grey for comparison; click a size to switch. Enter your flow or hover over the chart.
Results are read from the curve; no estimate is made outside the curve.
Features and benefits
Technical specifications
- CompatibilityISO 16028 (ISO 6.3 → ISO 25)
- Valve typeFlat face
- Connection systemPush-type (push-to-connect)
- LockingRadial locking balls + safety lock
- Connection under residual pressureNot permitted (connecting and disconnecting)
- Material / coatingCarbon steel, Zn-Fe (Cr III)·also AISI 316L stainless steel and brass
- Standard sealNBR·optional FKM, FFKM, EPDM
- Thread optionsBSPP, NPT, UNF (SAE), metric L and S, bulkhead
- Body sizes6.3·10·12.5·19·25
- Working pressureUp to 315 bar·350–500 bar version available
- Rated flow rateUp to 189 l/min at 1 bar pressure drop
- Leakage per disconnection0.02–0.25 ml
- Operating temperature−20 °C/+100 °C·up to +200 °C in stainless steel and brass
Applications
Where is the QCF used?
Instructions and warnings
Before use.
Correct use
For long life and reliable sealing
- Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
- For a full connection, make sure the male and female halves are on the same axis.
Warnings
Read before installation and use
- !Do not connect or disconnect under dynamic pressure.
- !Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
- !Make sure the system pressure is below the maximum working pressure.
- !Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
- !For any other questions, contact the Oleocon technical support team.
Other QCF products with the same body size
Same mounting dimensions, only the connection thread changes · 25 connection options
What does QCF-25B-NPT1 mean?
Other sizes of this type
Downloads
Catalogs, Technical Data and CAD.
You may also like





























