Skip to content
QCA · Quick couplings

QCA-50B-MSAE24

UNF male thread (SAE)ISO 8434-2

ISO 7241-A compliant poppet-type quick coupling with ball locking. It is the most widely used connection size in the world for tractors, agricultural equipment and general hydraulics; manufactured in body sizes from 6.3 to 50.

QCA-50B-MSAE24 – UNF male thread (SAE)
QCA-50B-MSAE24 · UNF male thread (SAE)
Dimensions

QCA-50B-MSAE24 and other products in body size 50

Letters refer to the dimensions on the technical drawing. Click a code to open that product.

Performance

How much can QCA-50B-MSAE24 take?

Operating conditions and sealing.

100bar
Working pressure · series maximum 315 bar
  • Working pressure100 bar1450 psi
  • Burst pressure400 bar5802 psi
  • Flow rate757 l/dk199.98 gpm

Technical data

Pressure drop of this product.

The highlighted curve is this product’s body size; other sizes are shown in thin grey for comparison; click a size to switch. Enter your flow or hover over the chart.

0.57.3 0.710.2 114.5 1.521.8 229 2.536.3 343.5 3.550.8 458 4.565.3 572.5 20.53 30.79 51.32 102.64 205.28 307.93 5013.2 10026.4 20052.8 30079.3 500132.1 1000264.2 2000528.3 3000792.5 50001320.9 ΔP (bar) Q (l/min) ΔP (PSI) Q (GPM) ISO 6,3 ISO 10 ISO 12,5 ISO 19 ISO 25 ISO 31,5 ISO 40 ISO 50
50Catalogue tableValues from the ISO body size table.
Rated flow
757l/min
200 GPM
Pressure drop at rated flow
1.3bar
19 PSI · read from the curve
Source
Catalogue table
l/min
≈ 2.0bar28 PSI · at 984 l/min (260 GPM)

Results are read from the curve; no estimate is made outside the curve.

Features and benefits

Technical specifications

  • LockingLocking ball system
  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 250 bar
  • Body sizesISO 6.3–50
  • CompatibilityISO 7241-A
  • Thread optionsBSPP·NPT·UNF·Metric
  • SealNBR/FKM
  • Flow rateUp to 757 l/min
  • MaterialCarbon steel·Stainless steel·Brass
  • Connection typePush-type
  • Under residual pressureConnection: not permitted·Disconnection: not permitted
  • Valve typePoppet

Applications

Where is QCA used?

All application areas 8

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Do not connect or disconnect under residual pressure.
  2. Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
  3. For a full connection, make sure the male and female halves are on the same axis.

Warnings

Read before installation and use

  • Do not connect or disconnect under dynamic pressure.
  • Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

Other QCA products with the same body size

Same mounting dimensions, only the connection thread changes · 27 connection options

50body sizesame body, different connection thread

View all

What does QCA-50B-MSAE24 mean?

QCA
Series Poppet type
50
Body size 50
B
Half Male
MSAE24
Thread 1 7/8-12 UN erkek

Other sizes of this type

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept