Poppet type
6,3–50315bar
ISO 7241-A / B
Metric S seriesISO 8434- 1
ISO 7241-A compliant poppet-type quick coupling with ball locking. It is the most widely used connection size in the world for tractors, agricultural equipment and general hydraulics; manufactured in body sizes from 6.3 to 50.
QCA-40A-M30S and other products in body size 40
Letters refer to the dimensions on the technical drawing. Click a code to open that product.
How much can QCA-40A-M30S take?
Operating conditions and sealing.
- Working pressure160 bar2321 psi
- Burst pressure640 bar9282 psi
- Flow rate379 l/dk100.12 gpm
Technical data
Pressure drop of this product.
The highlighted curve is this product’s body size; other sizes are shown in thin grey for comparison; click a size to switch. Enter your flow or hover over the chart.
Results are read from the curve; no estimate is made outside the curve.
Features and benefits
Technical specifications
- LockingLocking ball system
- Operating temperature−20 °C/+100 °C
- Working pressureUp to 250 bar
- Body sizesISO 6.3–50
- CompatibilityISO 7241-A
- Thread optionsBSPP·NPT·UNF·Metric
- SealNBR/FKM
- Flow rateUp to 757 l/min
- MaterialCarbon steel·Stainless steel·Brass
- Connection typePush-type
- Under residual pressureConnection: not permitted·Disconnection: not permitted
- Valve typePoppet
Applications
Where is QCA used?
Instructions and warnings
Before use.
Correct use
For long life and reliable sealing
- Do not connect or disconnect under residual pressure.
- Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
- For a full connection, make sure the male and female halves are on the same axis.
Warnings
Read before installation and use
- !Do not connect or disconnect under dynamic pressure.
- !Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
- !Make sure the system pressure is below the maximum working pressure.
- !Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
- !For any other questions, contact the Oleocon technical support team.
Interchange
Equivalent products
Equivalent part numbers of other brands for this product and the matching half it connects with.
| Brand | Their part number | Compatible half | Oleocon |
|---|---|---|---|
| Oleocon | QCA-40A-M30S | QCA-40B-M30S | QCA-40A-M30S |
| Stauff | QRC-IA-38-F-30S-BT-W3AA | QRC-IA-38-M-30S-BT-W3AA | QCA-40A-M30S |
This table is compiled for reference; please confirm before ordering.
Other QCA products with the same body size
Same mounting dimensions, only the connection thread changes · 27 connection options
What does QCA-40A-M30S mean?
Other sizes of this type
- 6,3 M14×1,5 (6S)QCA-6A-M6S
- 10 M16×1,5 (8S)QCA-10A-M8S
- 10 M18×1,5 (10S)QCA-10A-M10S
- 10 M20×1,5 (12S)QCA-10A-M12S
- 12,5 M18×1,5 (10S)QCA-12A-M10S
- 12,5 M20×1,5 (12S)QCA-12A-M12S
- 12,5 M24×1,5 (16S)QCA-12A-M16S
- 19 M20×1,5 (12S)QCA-20A-M12S
- 19 M24×1,5 (16S)QCA-20A-M16S
- 19 M30×2 (20S)QCA-20A-M20S
- 25 M24×1,5 (16S)QCA-25A-M16S
- 25 M30×2 (20S)QCA-25A-M20S
- 25 M36×2 (25S)QCA-25A-M25S
- 31,5 M30×2 (20S)QCA-31A-M20S
- 31,5 M36×2 (25S)QCA-31A-M25S
- 31,5 M42×2 (30S)QCA-31A-M30S
- 40 M52×2 (38S)QCA-40A-M38S
- 50 M42×2 (30S)QCA-50A-M30S
- 50 M52×2 (38S)QCA-50A-M38S
Downloads
Catalogs, Technical Data and CAD.
You may also like






























