Poppet type
6,3–50315bar
ISO 7241-A / B
Metric L series, bulkheadISO 8434-1
ISO 7241-A compliant poppet-type quick coupling with ball locking. It is the most widely used connection size in the world for tractors, agricultural equipment and general hydraulics; manufactured in body sizes from 6.3 to 50.
QCA-31A-M28L-BH and other products in body size 31,5
Letters refer to the dimensions on the technical drawing. Click a code to open that product.
How much can QCA-31A-M28L-BH take?
Operating conditions and sealing.
- Working pressure200 bar2901 psi
- Burst pressure800 bar11603 psi
- Flow rate288 l/dk76.08 gpm
Technical data
Pressure drop of this product.
The highlighted curve is this product’s body size; other sizes are shown in thin grey for comparison; click a size to switch. Enter your flow or hover over the chart.
Results are read from the curve; no estimate is made outside the curve.
Features and benefits
Technical specifications
- LockingLocking ball system
- Operating temperature−20 °C/+100 °C
- Working pressureUp to 250 bar
- Body sizesISO 6.3–50
- CompatibilityISO 7241-A
- Thread optionsBSPP·NPT·UNF·Metric
- SealNBR/FKM
- Flow rateUp to 757 l/min
- MaterialCarbon steel·Stainless steel·Brass
- Connection typePush-type
- Under residual pressureConnection: not permitted·Disconnection: not permitted
- Valve typePoppet
Applications
Where is QCA used?
Instructions and warnings
Before use.
Correct use
For long life and reliable sealing
- Do not connect or disconnect under residual pressure.
- Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
- For a full connection, make sure the male and female halves are on the same axis.
Warnings
Read before installation and use
- !Do not connect or disconnect under dynamic pressure.
- !Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
- !Make sure the system pressure is below the maximum working pressure.
- !Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
- !For any other questions, contact the Oleocon technical support team.
Interchange
Equivalent products
Equivalent part numbers of other brands for this product and the matching half it connects with.
| Brand | Their part number | Compatible half | Oleocon |
|---|---|---|---|
| Oleocon | QCA-31A-M28L-BH | QCA-31B-M28L-BH | QCA-31A-M28L-BH |
| Stauff | QRC-IA-31-F-28LB-BT-W3AA | QRC-IA-31-M-28LB-BT-W3AA | QCA-31A-M28L-BH |
This table is compiled for reference; please confirm before ordering.
Other QCA products with the same body size
Same mounting dimensions, only the connection thread changes · 37 connection options
What does QCA-31A-M28L-BH mean?
Other sizes of this type
- 6,3 M12×1,5 (6L)QCA-6A-M6L-BH
- 10 M14×1,5 (8L)QCA-10A-M8L-BH
- 10 M16×1,5 (10L)QCA-10A-M10L-BH
- 10 M18×1,5 (12L)QCA-10A-M12L-BH
- 12,5 M18×1,5 (12L)QCA-12A-M12L-BH
- 12,5 M22×1,5 (15L)QCA-12A-M15L-BH
- 12,5 M26×1,5 (18L)QCA-12A-M18L-BH
- 19 M22×1,5 (15L)QCA-20A-M15L-BH
- 19 M26×1,5 (18L)QCA-20A-M18L-BH
- 19 M30×2 (22L)QCA-20A-M22L-BH
- 25 M26×1,5 (18L)QCA-25A-M18L-BH
- 25 M30×2 (22L)QCA-25A-M22L-BH
- 25 M36×2 (28L)QCA-25A-M28L-BH
- 31,5 M30×2 (22L)QCA-31A-M22L-BH
- 31,5 M45×2 (35L)QCA-31A-M35L-BH
- 40 M45×2 (35L)QCA-40A-M35L-BH
- 40 M52×2 (42L)QCA-40A-M42L-BH
- 50 M45×2 (35L)QCA-50A-M35L-BH
- 50 M52×2 (42L)QCA-50A-M42L-BH
Downloads
Catalogs, Technical Data and CAD.
You may also like






























