Skip to content
QCA · Quick couplings

QCA-31A-M35L

Metric L seriesISO 8434- 1

ISO 7241-A compliant poppet-type quick coupling with ball locking. It is the most widely used connection size in the world for tractors, agricultural equipment and general hydraulics; manufactured in body sizes from 6.3 to 50.

QCA-31A-M35L – Metric L series
QCA-31A-M35L · Metric L series
Dimensions

QCA-31A-M35L and other products in body size 31,5

Letters refer to the dimensions on the technical drawing. Click a code to open that product.

Performance

How much can QCA-31A-M35L take?

Operating conditions and sealing.

200bar
Working pressure · series maximum 315 bar
  • Working pressure200 bar2901 psi
  • Burst pressure800 bar11603 psi
  • Flow rate288 l/dk76.08 gpm

Technical data

Pressure drop of this product.

The highlighted curve is this product’s body size; other sizes are shown in thin grey for comparison; click a size to switch. Enter your flow or hover over the chart.

0.57.3 0.710.2 114.5 1.521.8 229 2.536.3 343.5 3.550.8 458 4.565.3 572.5 20.53 30.79 51.32 102.64 205.28 307.93 5013.2 10026.4 20052.8 30079.3 500132.1 1000264.2 2000528.3 3000792.5 50001320.9 ΔP (bar) Q (l/min) ΔP (PSI) Q (GPM) ISO 6,3 ISO 10 ISO 12,5 ISO 19 ISO 25 ISO 31,5 ISO 40 ISO 50
31,5Catalogue tableValues from the ISO body size table.
Rated flow
288l/min
76 GPM
Pressure drop at rated flow
1.6bar
23 PSI · read from the curve
Source
Catalogue table
l/min
≈ 2.6bar37 PSI · at 374 l/min (99 GPM)

Results are read from the curve; no estimate is made outside the curve.

Features and benefits

Technical specifications

  • LockingLocking ball system
  • Operating temperature−20 °C/+100 °C
  • Working pressureUp to 250 bar
  • Body sizesISO 6.3–50
  • CompatibilityISO 7241-A
  • Thread optionsBSPP·NPT·UNF·Metric
  • SealNBR/FKM
  • Flow rateUp to 757 l/min
  • MaterialCarbon steel·Stainless steel·Brass
  • Connection typePush-type
  • Under residual pressureConnection: not permitted·Disconnection: not permitted
  • Valve typePoppet

Applications

Where is QCA used?

All application areas 8

Instructions and warnings

Before use.

Correct use

For long life and reliable sealing

  1. Do not connect or disconnect under residual pressure.
  2. Before connecting, clean the mating surfaces thoroughly so that no dirt enters the system.
  3. For a full connection, make sure the male and female halves are on the same axis.

Warnings

Read before installation and use

  • Do not connect or disconnect under dynamic pressure.
  • Do not connect or disconnect when the circulating fluid temperature is above 80 °C / 176 °F.
  • Make sure the system pressure is below the maximum working pressure.
  • Make sure the Oleocon product you have selected is suitable for your system's temperature, material and pressure requirements.
  • For any other questions, contact the Oleocon technical support team.

Interchange

Equivalent products

Equivalent part numbers of other brands for this product and the matching half it connects with.

Scroll the table sideways to see all columns
BrandTheir part numberCompatible halfOleocon
OleoconQCA-31A-M35LQCA-31B-M35LQCA-31A-M35L
StauffQRC-IA-31-F-35L-BT-W3AAQRC-IA-31-M-35L-BT-W3AAQCA-31A-M35L

This table is compiled for reference; please confirm before ordering.

Send us the part number

Other QCA products with the same body size

Same mounting dimensions, only the connection thread changes · 37 connection options

31,5body sizesame body, different connection thread

View all

What does QCA-31A-M35L mean?

QCA
Series Poppet type
31
Body size 31,5
A
Half Female
M35L
Thread M45×2 (35L)

Other sizes of this type

Downloads

Catalogs, Technical Data and CAD.

You may also like

Related series

Request a quote

Fill in the form and our team will get back to you as soon as possible.

Cookie preference

We use measurement cookies to improve the site. They only run with your consent. Cookie Policy

Reject Accept